The ‘Definitive Guide’ on How to Reset Your Amazon Echo Device

Amazon offers a number of different smart speakers under the brand name Echo. These are smart speakers that come pre-loaded with Alexa, the speech assistant developed by Amazon. Echo speakers enable you to use only your voice to control any devices that are connected to the speaker.

There is no question that devices that use the Amazon Echo platform are fantastic; however, what should you do if your speaker appears to be experiencing some difficulties? For example, when it will not answer to your voice commands, when there are problems with the audio output, or when it simply cannot establish a connection to the internet.

The issue should be resolved by doing a factory reset in any of these circumstances. Nevertheless, if you decide to perform a factory reset on your Amazon Alexa Echo, all of the data that has been connected with your device will be deleted. After you have completed the reconfiguration, everything will once again be accessible, and ideally it will be operating normally.

Because there are a lot of Echo smart speakers on the market, we’ve decided to provide a comprehensive tutorial that explains how to reset all of the different kinds of Amazon Echo products.

Motives to Reset Your Amazon Echo Device

As was just mentioned, there are a lot of different scenarios in which you can find it necessary to reset the speaker. It might be due to some problems, an unresponsive helper, the fact that it was given to another member of the family, the fact that it was donated to a good cause, or even that it was simply sold off. Just reading through this instructions will allow you to effortlessly reset any Echo smart speaker, regardless of the reason why you might need to do so.

The Amazon Echo: How to Reset It

There have been four iterations of the smart speaker known as the Amazon Echo. Review the instructions for the option that corresponds to your Echo speaker.

Reset Echo 1st Generation

To remove the SIM card, you’ll need an ejector tool or a paper clip.
On the speaker, look for a button labeled “Reset.”
Using the paper clip, press the reset button on the device.
Keep pressing the button until the light on the speaker shuts off, then wait until it turns back on again.

Reset Echo 2nd Generation

On the speaker, you need to press and hold the Microphone Off button while also pressing the Volume Down button.
Hold both buttons down for a total of twenty seconds.
The process of resetting the device is considered finished when the ring light goes off and then comes back on again.

Reset Echo 3rd and 4th Generation

After pressing and holding the Action button for twenty seconds, the speaker will begin to play.
Keep pressing the button until you see the ring light turn off, then turn back on again.
The procedure of resetting has been finished successfully after the indicator light comes back on.

The Amazon Echo Plus: How to Do a Factory Reset

Here are the steps you need to take in order to reset your Echo Plus smart speaker, regardless of whether it is the first or second version.

Reset Echo Plus 1st Generation

Use a paper clip or another tool of a similar nature and hit the button to reset the device.
Maintain pressure on the button for a total of eight seconds.
When the light on the speaker goes out and then comes back on again, you will know that the reset has been successful.
Alternately, you can push and immediately release the reset button in order to keep the home connections on the device.

Reset Echo Plus 2nd Generation

To turn off the microphone and decrease the volume, press the corresponding buttons.
Keep pressing them for a total of twenty seconds.
In a moment, the ring light will go out and then come back on.
To do a factory reset on the device while preserving the connections to your home network, press and hold the Action button for twenty seconds.

The Amazon Echo Dot: How to Reset It

One of the most well-liked Alexa-enabled smart speakers now available is called the Echo Dot. There are now five different iterations of the Amazon Echo Dot available to purchase. Follow the instructions that are specific to the generation of Echo Dot that you own.

Reset Echo Dot 1st Generation

Paper clips can be used to push and hold the button that resets the device.
When the light on the ring goes out and then comes back on, you can let go of the button.

Reset Echo Dot 2nd Generation

When holding down the Microphone Off button, press the Volume Down button.
Hold down these buttons for a total of twenty seconds.
You will be able to proceed with setting up the device as soon as the ring light goes off and then comes back on.

Reset Echo Dot 3rd, 4th, and 5th Generation And Kids Generation

After pressing the Action button, continue to hold it down for a total of twenty seconds.
In a moment, the ring light will go out and then come back on.
The factory settings have been restored.

Echo Show, Echo Show 15, and Echo Spot: How to Do a Factory Reset

Both the Echo Show and the Echo Spot have identical procedures for resetting the device.

Maintain simultaneous pressure on the Mic and Volume Down buttons for the whole 15 seconds. During those fifteen seconds, you ought to see the Amazon logo shown on the screen.
You should be able to find the options for resetting the device shown on the screen itself.

Keep Smart Home Connections

While controlling these devices using a smart speaker, you will be utilizing your voice to provide commands.
Simply say “Go To Settings”.
You can also pick the Settings option by swiping down from the screen’s top and then selecting it.
Choose Device Options by tapping on it.
At the final step, select the option to “Reset to Factory Defaults while retaining Smart Home Connectivity.”

Instructions on How to Reset the Echo Studio Smart Speaker

How to Reset Amazon Echo Studio Smart Speaker

Hold down the Volume Down button as well as the Microphone Off button for a total of twenty seconds.
Hold your breath and wait for the ring light to turn off before pressing the button again.
To do a factory reset on the device while ensuring that it retains its home connections, press and hold the Action button for twenty seconds.

Echo Flex Smart Plug: How to Do a Factory Reset

How to Reset Amazon Echo Flex Smart Plug

Maintain pressure on the Action button for the whole twenty seconds.
The orange LED will blink several times before going off.
As soon as the LEd goes blue, it will revert to its previous orange state.
The Amazon Echo Flex can then be reactivated by following these steps.
To make a backup of your smart home connections, press and hold the Action button for twenty seconds, then watch for the orange Light to blink on and off before turning it off completely.
The same LED will first glow blue, and later it will glow orange.
Even when the device has been restarted in this manner, the smart home connections can still be accessed through the device.

Echo Input Smart Speaker: How to Do a Factory Reset

After pressing and holding the Action button for twenty seconds, the speaker will begin to play.
The device will immediately begin operating in the setup mode. This is not shown by any light or LED in any way.

Instructions on How to Reset the Echo Input on a Portable Smart Speaker

Maintain pressure on both the Volume Up and Volume Down buttons at the same time.
Maintain pressure on the buttons for a total of three seconds.
When the blue light flashes on and off repeatedly, this indicates that the reset has been successfully performed.

Use the Alexa App to Factory Reset Any Amazon Echo Smart Speaker.

It is recommended that you use the Alexa app to configure and manage your Echo Smart Speakers. On your Android and iOS devices, you will have the option to download the app at no cost.

Open the Alexa app, then navigate to the bottom of the screen to select the Devices tab.
Now, select Echo and Alexa by tapping on them.
Choose the Echo smart speaker that best suits your needs here.
After tapping the speaker, select the Settings icon located in the upper right corner of the screen.
Scroll all the way down and tap on the Deregister button.
It will now inquire as to whether or not you are certain to reset the chosen Echo smart speaker.
Just selecting the Deregister option will start the process of resetting your Echo smart speaker.

Summary

This brings to a close the comprehensive instruction that walked you through resetting any and all Amazon Echo smart speakers immediately. The majority of these different devices have reset procedures that are very similar to one another, which means that it won’t be too tough to remember how to reset each of them. In the event that you have any inquiries or concerns, please do not hesitate to post them in the comments section below.

How to Factory Reset a Sony Smart TV [including Android TV and Google TV, as well as Older TVs]

There are rumors that the NVIDIA RTX 50 series will have twice the performance of the RTX 40 series. Here are the specifications, projected performance, and more.