When players delve into the realm of fluids in Satisfactory, particularly Crude Oil, the gameplay evolves significantly. You’ll begin to calculate in cubic meters to optimize your production configurations. Crude Oil is the primary liquid resource you will manage, crucial for enhancing your factory’s energy output. Here’s the optimal Oil production layout in Satisfactory.
Optimal Oil Production Layouts in Satisfactory
To establish the most effective Crude Oil production configuration, it’s vital to understand the quantity of Oil at your disposal. Oil nodes vary in purity: Impure, Normal, and Pure, each yielding different outputs. Each type requires a specific number of refineries for a fully efficient Oil Extraction system. Below is a breakdown of the required refineries based on Oil node purity:
| Node Purity | m3/min | Number of Refineries |
| Impure Node | 60 | 1 |
| Normal Node | 120 | 2 |
| Pure Node | 240 | 4 |
Things drastically shift when you begin overclocking. Each node can be overclocked up to 250%. A fully overclocked normal oil node can increase from 120 m3/min to 300 m3/min, necessitating five refineries for each completely overclocked normal oil node.
This situation can become complex, as you won’t always have the necessary overclocking or slugs to achieve 250% at every Oil node. You might start production without considering overclocking, meaning you will have to reconfigure your setup later once you achieve sufficient overclocking resources.
To maximize efficiency, always aim to extract at the highest rate from the node, using that as the basis for calculations and planning. For instance, if you wish to process Crude Oil into products like Plastic or Rubber on a normal purity node, start your calculations with the 250% overclocked figure, which is 300 m3/min. Given that both Plastic and Rubber require 30 m3/min each, you will need 10 refineries for both products to achieve 100% efficiency when the Oil Extractor is overclocked.
Begin at the source and work upwards for optimal production setups utilizing Oil. This will require ample space and strategic planning, so ensure you have enough area available. If necessary, you can remove rocks and boulders if they’re not part of the terrain. If you’re having difficulty finding additional Oil sources, consider unlocking and utilizing the map, as you might discover some you haven’t encountered yet. Oil appears as a dark blot on the map.
Leave a Reply